Hyperliquid guide: connect, deposit, trade and withdraw

Hyperliquid is a decentralized exchange: you log in at app.hyperliquid.xyz with an email or a crypto wallet, deposit USDC, and trade perpetuals without paying gas per order. There is no account password to reset and no support desk that can reverse a transfer, so the deposit minimum (5 USDC), the network you send on and the safety of your wallet keys are your responsibility.

Hyperliquid at a glance

LoginEmail (6-digit code) or a crypto wallet with a gas-less "Enable Trading" signature
Deposit, wallet usersUSDC on Arbitrum only; deposits below 5 USDC are lost
Deposit, email usersUSDC on Arbitrum, Ethereum, Base or Polygon, plus assets such as BTC, ETH and SOL
Perpetual fees, base tier0.045% taker / 0.015% maker
Spot fees, base tier0.070% taker / 0.040% maker
FundingPaid every hour, capped at 0.5% per hour
Maximum leverage3x to 40x depending on the asset
Referral code used on this siteHYPEKR — 4% fee discount on the first $25M of volume

Open Hyperliquid

Referral code on this site: HYPEKR. The docs state a referred user gets a 4% discount on fees for the first $25M in volume. Enter the code at app.hyperliquid.xyz/referrals or join through a referral link.

Before you start

The only app address named in the docs is app.hyperliquid.xyz. Bookmark it. Copies of the site exist to steal wallet signatures, so do not reach it through ads or links in messages.

Hyperliquid has no identity verification step in its onboarding guide, and it also has no customer account to recover. Whether you may use it depends on where you live; read the terms on the site before depositing.

Perpetuals are leveraged. A position can be liquidated and the margin lost; start with an amount you can afford to lose entirely.

Step 1 — Connect with email or a wallet

There are two ways in. Email is simpler; a wallet keeps the keys in software you already control.

  1. Email: click "Connect", enter your email, press "Submit" and type the 6-digit code sent to you.
  2. Wallet: click "Connect", choose your wallet and press "Connect" in the wallet pop-up.
  3. Wallet users then click "Enable Trading" and press "Sign". This signature costs no gas.
  4. To use a referral code, open app.hyperliquid.xyz/referrals and enter it (this site uses HYPEKR).
  • An email login creates a wallet for you. The docs have a page on exporting that wallet; do it early and store the key offline.
  • Read every wallet prompt. A login or "Enable Trading" signature should not ask to send tokens.

Step 2 — Deposit

What you can send depends on how you logged in, and amounts under the minimum are not credited.

  1. Click "Deposit".
  2. Wallet users: enter the USDC amount, click "Deposit" and confirm in your wallet. You need USDC on Arbitrum plus a little ETH on Arbitrum for gas.
  3. Email users: the window shows an address. Send USDC on Arbitrum, Ethereum, Base or Polygon, or one of the other listed assets such as BTC, ETH or SOL.
  4. USDC arrives as USDC on HyperCore. Other assets must be sold for USDC or USDT after they arrive if you want to trade perpetuals with them.
  • Wallet users: USDC through Arbitrum only, and the docs state that deposits below 5 USDC are lost.
  • Email users: a deposit below 5 USDC is not credited and is sent to your email wallet; below 1 USDC it is lost.
  • Email users who send the wrong asset or an unsupported network have the funds redirected to their email wallet within 10 minutes.
  • Send a small amount above the minimum first, and only then the rest.

Step 3 — Place a perpetual order

Trading on Hyperliquid is gas-free. Position size equals leverage multiplied by the collateral you commit.

  1. Pick the token you want to trade.
  2. Choose long or short.
  3. Set the size with the slider or by typing it.
  4. Click "Place Order", then "Confirm".
  • Order types: market, limit, stop market, stop limit, take market, take limit, scale, TWAP, plus chase and trailing stop. Options include reduce only, post only (ALO), IOC and take-profit / stop-loss.
  • Take-profit and stop-loss orders execute as market orders.
  • A TWAP order runs from 5 minutes to 7 days with a $100 minimum total size.
  • Fees at the base tier are 0.045% taker and 0.015% maker on perpetuals, and 0.070% taker and 0.040% maker on spot. Tiers use 14-day volume, with spot volume counted double.
  • Staking HYPE lowers fees, from 5% off above 10 HYPE to 40% off above 500,000 HYPE.

Funding and liquidation

Two mechanisms decide what a leveraged position costs and when it is closed for you.

  • Funding is paid every hour between longs and shorts; Hyperliquid collects no fee on it. The hourly rate is one-eighth of the 8-hour rate and is capped at 0.5% per hour.
  • The funding payment is position size multiplied by the oracle price and the funding rate.
  • Maximum leverage ranges from 3x to 40x by asset. Maintenance margin is half the initial margin at maximum leverage, which is 1.25% for 40x assets and 16.7% for 3x assets.
  • Liquidation is triggered on the mark price. The position is first sent to the order book as market orders, and any collateral left stays with you.
  • If account equity falls below two-thirds of the maintenance margin, the position goes to the liquidator vault and the maintenance margin is not returned.
  • For positions above 100,000 USDC only 20% is sent to the book at first, followed by a 30-second cooldown.
  • With cross margin, a backstop liquidation takes all cross positions and margin; with isolated margin it takes only that position and its margin.

Step 4 — Withdraw

Withdrawals start from the trading page.

  1. Open app.hyperliquid.xyz/trade and click "Withdraw" at the bottom right.
  2. Follow the window: enter the amount and confirm.
  3. Check your wallet on the destination network.
  • The docs say small gas fees may apply depending on the chain and method. They give no fixed fee or time, so read the amount shown in the withdrawal window before confirming.
  • Close or reduce positions first: collateral that is supporting an open position cannot be withdrawn without raising liquidation risk.
  • If a withdrawal does not arrive, the docs have a "Withdrawal issues" section. Treat anyone who messages you first offering to help as a scammer.

How funds are held, and what is up to you

Your funds are controlled by your wallet key, not by a login and password. The docs state that USDC is natively minted on Hyperliquid, and that the legacy Arbitrum bridge, which was audited by Zellic, holds less than 10% of the USDC supply on HyperCore.

The docs have no page that lists the platform's risks, so this page does not present one. Smart-contract, validator and oracle risk exist on any on-chain exchange and are not removed by an audit.

  • Keep the seed phrase or exported key offline, and never type it into a website or send it to anyone.
  • Use a hardware wallet for amounts you could not afford to lose.
  • Check the address bar for app.hyperliquid.xyz before every signature.
  • Reject any signature that asks to transfer tokens or approve spending when you only meant to log in.
  • Respect the 5 USDC minimum and the supported networks on every deposit.
  • Use leverage low enough that an ordinary daily move does not reach your liquidation price.
  • Keep on the exchange only what you are trading with.

Common questions

What is the minimum deposit on Hyperliquid?

5 USDC. For wallet users the docs state that deposits below 5 USDC are lost; for email users they are sent to the email wallet, and below 1 USDC they are lost.

Which network do I use to deposit USDC?

Wallet users deposit through Arbitrum only. Email users can send USDC on Arbitrum, Ethereum, Base or Polygon.

What are Hyperliquid's trading fees?

At the base tier, perpetuals cost 0.045% taker and 0.015% maker, and spot costs 0.070% taker and 0.040% maker.

Does Hyperliquid charge gas for each trade?

No. The docs state that trading on Hyperliquid is gas-free. Deposits from Arbitrum need ETH for gas, and withdrawals may carry a small gas fee.

How much does a referral code save?

The docs state a 4% discount on fees for the first $25M in volume. This site uses the code HYPEKR.

How often is funding paid?

Every hour, at one-eighth of the 8-hour rate, capped at 0.5% per hour.

Sources

Everything platform-specific was read from the Hyperliquid Docs pages above on 2026-11-13. The docs contain no screenshots, no withdrawal fee or time, and no page listing risks; this page leaves those out instead of guessing. Where this page and the docs differ, the docs are right. This is not investment advice.

Step-by-step Hyperliquid guide from the official docs: login, USDC deposits and minimums, perpetual orders, fees, funding, liquidation and withdrawals.